# Pole Hiisi: full machine-readable reference The Hiisi is a bespoke, full-power e-MTB from Pole Bicycles. Every frame part is CNC-machined from solid 7075-T6 aluminium and structurally bonded with no welds, machined to plus or minus 0.05 mm, and built to order in Jyvaskyla, Finland, around one rider's measurements. One frame platform covers 152 to 200 mm of rear travel. Motor: Maxon Air S, 90 Nm, 620 W peak, 2.0 kg, 400 to 850 Wh. K1, K2 and K3 define the frame envelope. Final fit and geometry are set from the rider's measurements, riding position and terrain. Confirmed orders are grouped into production batches. There is no finished-bike stock. Prices: complete build from 11537 EUR ex VAT (€14,479 incl. 25.5% Finnish VAT). Frameset from 7964 EUR ex VAT (€9,995 incl. Finnish VAT). VAT is set by the customer's country at checkout. The customer pays 50% when the specification is approved and production begins. The balance is due when the bike is ready to ship. Frameset contents: Frame, rear shock, Maxon Air S motor and 600 Wh battery, display, remote, headset and frame hardware. Build it with your own parts. ## Full geometry Source of truth: Pole Bicycles Hiisi Geometry sheet. Measured at sag (35% travel). Fork offset range depends on the manufacturer. Geometry varies slightly with component choices. ### Hiisi 152 mm, Full 29-inch (K1 / K2 / K3) - Rider height: 157–170 cm / 171–182 cm / 183–198 cm - Head angle: 63.5° / 63.5° / 63.5° - Reach: 444.7 / 474.7 / 504.7 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 782.17 / 812.17 / 842.17 mm - Chainstay: 451.85 / 451.85 / 451.85 mm - Wheelbase: 1234.02 / 1264.02 / 1294.02 mm - Top tube: 549.5 / 579.5 / 609.5 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 80° / 80° / 80° - BB drop: -22.6 / -22.6 / -22.6 mm - BB height: 356.6 / 356.6 / 356.6 mm - Fork offset: 44–51 / 44–51 / 44–51 mm - Travel F/R: 160 / 152 / 160 / 152 / 160 / 152 mm - Shock size: 55×210 / 55×210 / 55×210 - Fork A2C: 576 / 576 / 576 mm ### Hiisi 173 mm, Full 29-inch (K1 / K2 / K3) - Rider height: 157–170 cm / 171–182 cm / 183–198 cm - Head angle: 64° / 64° / 64° - Reach: 444.7 / 474.7 / 504.7 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 790.83 / 820.83 / 850.83 mm - Chainstay: 451.1 / 451.1 / 451.1 mm - Wheelbase: 1241.93 / 1271.93 / 1301.93 mm - Top tube: 549.5 / 579.5 / 609.5 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 80° / 80° / 80° - BB drop: -15.56 / -15.56 / -15.56 mm - BB height: 356.6 / 356.6 / 356.6 mm - Fork offset: 44–51 / 44–51 / 44–51 mm - Travel F/R: 180 / 173 / 180 / 173 / 180 / 173 mm - Shock size: 65×230 / 65×230 / 65×230 - Fork A2C: 596 / 596 / 596 mm ### Hiisi 173 mm, Mullet (29/27.5) (K1 / K2 / K3) - Rider height: 155–168 cm / 169–182 cm / 183–195 cm - Head angle: 63° / 63° / 63° - Reach: 437.4 / 467.4 / 497.4 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 790.83 / 820.83 / 850.83 mm - Chainstay: 451.3 / 451.3 / 451.3 mm - Wheelbase: 1242.13 / 1272.13 / 1302.13 mm - Top tube: 552.1 / 582.1 / 612.1 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 79° / 79° / 79° - BB drop: -27.78 / -27.78 / -27.78 mm - BB height: 344.3 / 344.3 / 344.3 mm - Fork offset: 44–51 / 44–51 / 44–51 mm - Travel F/R: 180 / 173 / 180 / 173 / 180 / 173 mm - Shock size: 65×230 / 65×230 / 65×230 - Fork A2C: 596 / 596 / 596 mm ### Hiisi 180 mm, Full 29-inch (K1 / K2 / K3) - Rider height: 157–170 cm / 171–182 cm / 183–198 cm - Head angle: 64° / 64° / 64° - Reach: 444.7 / 474.7 / 504.7 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 790.83 / 820.83 / 850.83 mm - Chainstay: 449.6 / 449.6 / 449.6 mm - Wheelbase: 1240.43 / 1270.43 / 1300.43 mm - Top tube: 549.5 / 579.5 / 609.5 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 80° / 80° / 80° - BB drop: -10 / -10 / -10 mm - BB height: 356.6 / 356.6 / 356.6 mm - Fork offset: 44–51 / 44–51 / 44–51 mm - Travel F/R: 180 / 180 / 180 / 180 / 180 / 180 mm - Shock size: 67.5×250 / 67.5×250 / 67.5×250 - Fork A2C: 596 / 596 / 596 mm ### Hiisi 180 mm, Mullet (29/27.5) (K1 / K2 / K3) - Rider height: 155–168 cm / 169–182 cm / 183–195 cm - Head angle: 63° / 63° / 63° - Reach: 437.4 / 467.4 / 497.4 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 790.83 / 820.83 / 850.83 mm - Chainstay: 449.6 / 449.6 / 449.6 mm - Wheelbase: 1240.43 / 1270.43 / 1300.43 mm - Top tube: 552.1 / 582.1 / 612.1 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 79° / 79° / 79° - BB drop: -22.22 / -22.22 / -22.22 mm - BB height: 344.3 / 344.3 / 344.3 mm - Fork offset: 44–51 / 44–51 / 44–51 mm - Travel F/R: 180 / 180 / 180 / 180 / 180 / 180 mm - Shock size: 67.5×250 / 67.5×250 / 67.5×250 - Fork A2C: 596 / 596 / 596 mm ### Hiisi 200 mm, Mullet (29/27.5) (K1 / K2 / K3) - Rider height: 155–168 cm / 169–182 cm / 183–195 cm - Head angle: 62.7° / 62.7° / 62.7° - Reach: 432.9 / 462.9 / 492.9 mm - Stack: 630.99 / 630.99 / 630.99 mm - Front center: 794.73 / 824.73 / 854.73 mm - Chainstay: 448.0 / 448.0 / 448.0 mm - Wheelbase: 1242.73 / 1272.73 / 1302.73 mm - Top tube: 553.9 / 583.9 / 613.9 mm - Head tube: 110 / 110 / 110 mm - Seat tube: 343 / 343 / 350 mm - Seat angle: 79° / 79° / 79° - BB drop: -18.77 / -18.77 / -18.77 mm - BB height: 350.65 / 350.65 / 350.65 mm - Fork offset: 44–56 / 44–56 / 44–56 mm - Travel F/R: 200 / 200 / 200 / 200 / 200 / 200 mm - Shock size: 75×250 / 75×250 / 75×250 - Fork A2C: 606 / 606 / 606 mm ## Kinematics (measured) Leverage ratio vs. rear-wheel travel, per configuration. Higher progression = more support deep in the travel. Measured, not approximated. ### Leverage ratio, top-out to bottom-out - Hiisi 152: 3.25 to 2.40, progression ~26% - Hiisi 173: 3.18 to 2.31, progression 27.3% - Hiisi 180: 3.25 to 2.31, progression 28.8% - Hiisi 200: 3.25 to 2.25, progression 30.7% ### Anti-squat (percent) - Top-out: 117, at sag 70 mm: 107, bottom-out: 82 ### Anti-rise (percent) - At sag 70 mm: 47.9, bottom-out: 41.0 ## Hiisi 180, All-mountain This is how I'd build a 180 for all-mountain riding (size K2, 600 Wh). One way of many, and every line is a choice you make with us. This one runs Intend and EXT. A RockShox fork and shock bring the price down, your call. - Frame: Hiisi 7075-T6, size K2 (3900 g) - Motor: Maxon Air S (system) (2500 g) - Battery: 600 Wh internal (2800 g) - Fork: Intend Flash (180) (2410 g) - Shock: EXT Arma V4 (570 g) - Brakes: SRAM Maven Ultimate (1140 g) - Wheels: Newmen Phase 30 Carbon Enduro (1800 g) - Tyres: Schwalbe Magic Mary / Tacky Chan Gravity Pro (2625 g) - Cassette: SRAM XS-1275 T-Type (447 g) - Chain: SRAM GX T-Type (284 g) - Rear derailleur: SRAM GX Eagle AXS T-Type (490 g) - Shifter: SRAM AXS Rocker (70 g) - Cranks: E*thirteen Helix Race Carbon e-MTB (480 g) - Handlebar: BikeYoke Barmate Carbon 800×65 (260 g) - Stem: BikeYoke Barkeeper 45 mm (96 g) - Grips: All Mountain Style AMS Rise (85 g) - Headset: Enduro ZS44/ZS56 (120 g) - Saddle: BikeYoke SAGMA 3D Lite (260 g) - Dropper: RockShox Reverb AXS 175 mm (730 g) - Complete build, this configuration: 21 067 g (21.1 kg) ## At a glance - 152–200 mm rear travel - 160–200 mm front travel - 4 configurations - 3 wheel setups - Maxon Air S 90 Nm motor - 400–850 Wh battery + extender - K1–K3 frame sizes - 3 e-coat finishes - 7075-T6 aluminium alloy - ±0.05 mm tolerance - 27–31% leverage progression - CNC machined in Finland ## FAQ Q: What exactly is customised? A: K1, K2 and K3 define the frame envelope. Within it, we set the geometry from your measurements, riding position and terrain. We also set up the suspension, choose the components with you and finish the frame. The motor is a finished Maxon unit, and we set its assist speed to your market's rules. Q: How does payment work? A: You pay 50% when you approve your spec and production begins. The balance is due when your bike is ready to ship. Q: How long does it take? A: A custom build ships about two months from your order. We group confirmed orders into production batches, so some builds are faster when the parts are on the shelf or a compatible build is already scheduled. Ask us and we'll give you an honest date. Q: Do you ship worldwide? A: Yes. Prices adjust to your country. Non-EU customers handle local import duties, and we provide the documentation. ## Company Pole Bicycles Business ID 3444291-5 · VAT FI34442915 Jyväskylä, Finland Founder and lead engineer: Leo Kokkonen Contact: care@polebicycles.com Structured data: https://polebicycles.com/data/geometry.json and https://polebicycles.com/data/kinematics.json