ZEB SELECT

ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages. Featuring an all-new stiff 38mm chassis designed with the Charger 2.1 damper, DebonAir™ air spring technology, SKF Wiper Seals, and Maxima Plush Fluid.

FEATURES
New 38mm chassis for increased stiffness and rider confidence
Highly-tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
Highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low speed compression with rebound adjustment – designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail
Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
Maxima Plush damping fluid reduces friction and silences damper noise

Rock Shox Super Deluxe Ultimate

Designed for the latest hard-hitting enduro and trail bikes, Super Deluxe Ultimate features the ride tuning abilities of an air spring with both compression and rebound adjustment to fine tune to any trail. With a solid threshold adjustment for pedaling performance and Maxima Plush fluid for a buttery smooth feel, riders can now easily dial in a podium-worthy ride.

• Maxima Plush damping fluid reduces friction and silences damper noise
• Highly tunable DebonAir™ spring offers a coil-like consistent feel throughout the travel
• Separate and independent open and threshold pistons tuned exactly for your ride
• Low Speed Compression adjustment allowing fine tuning of compression needs from the base tune

CANE CREEK Kitsuma Air

• Damping: Twin Tube compression and independent rebound
• Tool-less adjustment system
• Three positions of the “Climb Switch”
• Mounting interface: Norglide® bushing 12.7 Mm Universal Axle
• Maximum pressure: 300 psi
• High speed compression (CHV)
• High speed trigger (DHV)
• Low speed compression (CBV)
• Low speed trigger (DBV)

Cane Creek Kitsuma Coil

• Tool-free wide range of adjustment
• Independent compression and rebound damping circuits
• Designed, developed and hand-built in Western North Carolina
• 468g (DB Coil 210mm w/o spring)
• Twin Tube independent compression and rebound damping circuits. Motorex 4wt Damper Oil
• High speed compression, Low speed compression, High speed rebound, Low speed rebound

SRAM – GX Eagle AXS

• Proven AXS wireless technology
• Rugged durability reowned in the GX range
• Expanded 520% gear range
• Compatible with the rest of the AXS range
• Ability to fully customize with the AXS app

SRAM – X01 Eagle

SHIFTER

The X01 Eagle™ shifter holds fast to these rules. With a forged aluminum trigger to hold up better to the demands that X01 Eagle riders ask of their machines. With an enhanced lever feel rolling on sealed cartridge bearings, offering more precision through the range of its movement.

DERAILLEUR

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture, to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52t cassettes and is backwards compatible to also work with 10-50t options. As part of the new Eagle Colorsystem, it comes in X01 Eagle signature colorway to go perfectly with any color cassette and chain a rider wants.

SRAM – XX1 Eagle AXS

XX1 Eagle AXS utilizes the proven backbone of SRAM 1x. With the lightest weight materials and a 520-percent gear range. The pinnacle of performance, paired with the connected components of Eagle AXS.

SRAM – GX (XG-1275 Eagle)

The new 10-52 Eagle cassette for riders who prioritize all day function over anything else. With an expanded, 520-percent gear range giving riders more ability to spin and recover on the burliest climbs. Featuring FULL PIN™ technology that uses lightweight, precision engineered steel cogs permanently connected with high-strength stainless steel pins. An open design similar to our X-DOME™ cassette that aids in mud clearance, giving riders crisp shifting performance and longer component life.

SRAM – XX1 (XG-1299 Eagle)

Whether for prized race machines or the build of their dreams, the XG-1299 cassette is the ultimate, giving riders unprecedented 520-percent range thanks to the new 10-52 tooth-span. Stronger racers are now free to choose larger chainrings for more top-end speed, without sacrificing climbing range. More time is spent higher up in the cassette where athletes power transfer is most efficient and wear is minimized. Featuring the industry’s strongest X-Dome™ architecture and proven XD™ driver body. With multiple Olympic, World Cup and World Championship titles, it also matches up perfectly to XX1 Eagle AXS™ enabled componentry.

Here is a neat tool we made so you can try out what seat post length and crank arm size is suitable for your body.

Miranda – Kappa

Kappa ebike cranks are crafted by a fully automated and proprietary cold forging process to ensure specific mechanical properties and consistent quality.

Aesthetically apart from its peers, the Kappa’s asymmetrical relief design minimizes the appearance of the crank’s width while disguising the strength and rigidity inherent in its cutting-edge craftsmanship. All Miranda cranks have been engineered for durability and to guarantee safe riding, even in extreme conditions.

SRAM – X1 E-MTB

Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, X1 crankarms are purpose built for the high-torque E-MTB environment.

Race Face – Aeffect R e-MTB

The ebike army asked for it and Race Face delivered. Introducing our fan favorite Aeffect crankarms re-configured and optimized to fit the specific needs of ebike shredders everywhere. 

Material:6066 Aluminum
Weight: 499g

Miranda – Chainflow 3D

Chainring Chainflow 3D Design 2 for Direct Mount for Bosch Gen 4 motor

SRAM – X-Sync 2 Eagle

Built with the needs of E-MTB riders in mind, and incorporating the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain, offered for Bosch motors.

FEATURES
• Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain
• Mud-clearing recesses
• An integral component of the SRAM 1x drivetrain

Race Face – Bosch G4 e-MTB 104BCD

So you have been turned on to this ebike thing – good for you! We are stoked to offer a Cinch eMTB Spider to run Race Face 104BCD rings on your RF ebike crankset (52mm chainline). This spider is only compatible with the Bosch Performance Line CX(aka-Gen4) motor.

Race Face – Chester 35

To make sure your bike goes where you want it to, the Chester bar combines precision steering, a comfortable feel, and a strength-to-weight ratio boosting 35mm bar diameter.

Specs
Bar Diameter (MM) 35.0
Bend (DEG): 8
Upward Sweep: (DEG) 5
Material: 6061 Aluminum
Weight: 400g
Weight: Conditions 20mm Rise

Truvativ – Descendant 35 Carbon

With the new Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from our best riders, the components in the Descendant line have been designed to work on the most aggressive trails. The full suite includes cranks, bars, stems, and seatposts.

SPECIFICATIONS
APPLICATION (HB) All mountain
CLAMP DIAM: 35.0mm
WIDTH: 760mm
RISE (HB): 20mm
COLOR/FINISH (HB): Natural Carbon
MATERIAL (HB): Carbon
BACKSWEEP (DEGREES): 7
WEIGHT (G): 194

SRAM – Code R

For superior braking power, we built Code R with our DirectLink lever mated to an oversized four-piston caliper. Finger ergonomics adapt with a tool-free reach adjust – offering a perfect balance of all forces: reliable, practical and – naturally – powerful.

FEATURES
Designed specifically for heavy-duty demands.
Engineered for easy installation and maintenance.
Metallic pads come standard for more power and longer wear.

SRAM – Code RSC

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink™ and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.

Designed specifically for heavy-duty demands.
Pivot bearing offers crisp lever feel and a fatigue-free ride.
Metallic pads come standard for more power and longer wear.

Braking – INCAS 2.0

A unique hydraulic ratio results in higher operating pressure and less movement at the lever compared to a normal braking system.
Offers sensitivity on the rider’s finger but reducing the muscular effort of hands and arms.
Master cylinder and caliper machined from billet and CNC machined with high quality finishing.
5mm braided Kevlar and steel hose maintains the optimal braking power that characterizes the INCAS system.
26mm caliper pistons float on 4×4 mm square o-rings derived from the motorbike industry.
Caliper: post mount
Color: bronze with braided silver hose

Here is a neat tool we made so you can try out what seat post length and crank arm size is suitable for your body.

SDG – Tellis Dropper Post

An absolute workhorse. A dropper post and remote combo with unsurpassed durability, reliability and simplicity all in one competitively priced package.

The Tellis has demonstrated total durability in the three years since it was originally launched, thanks to Trelleborg seals and Jagwire Lex Slick Housing and Stainless steel cables. The 1x remote lever has the lightest touch in the industry, requiring minimal force to actuate due to premium German IGUS bushings which minimizes the post’s stiction. The fully sealed cartridge system has been tested down to -20c and through the wettest and muddiest conditions, providing you the long term confidence you deserve.

crankbrothers – Highline 3

Premium Trelleborg® sealing
Exclusive Igus® LL-glide bearings and keys
Jagwire® cable and housing
Self-contained hydraulic cartridge delivers industry leading quality and reliability
Internal routing
Quick connect mechanism for ease of cable installation
Linear actuator for quick return speed
2-bolt standard head

BikeYoke – Revive MAX

125 mm, 160 mm or 185 mm infinitely adjustable lowering with a low installation height, solid weight, perfect lever ergonomics and an unrivaled smooth operation even at low temperatures make the REVIVE the new reference.

technology
The REVIVE is the first and only support on the market that has a patented REVIVE valve. With this, the seat post can be vented in a few seconds and thus reset. The REVIVE has a very simple hydraulic system based on the principle of an open oil bath system. 

E-DEEMAX 30 29

A brand new 30mm E-bike specific rim that’s super strong, tubeless ready and with PFP technology. The rim is welded and laced with 28 double butted spokes on downhill inspired hubs. All the E-Deemax reliability and toughness within reach.

Weight : 2160 grams (Pair 29″)

E-DEEMAX S30 29

PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall, which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain.

Wider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness.

Weight : 2070 grams (Pair 29″)