0

Cart

You’ve received your Pole Voima frameset – great! Here is a handy guide to building up your new frameset and a few “How-tos” for your brand new Voima.

We will add more and more videos to this section over time. Be sure to check back often to see what’s new!


First off, get your frameset out of the box and secured in a bike work stand. You’ll need to fit your Seatpost to do that! Here’s how to tighten the Voima Integrated seat post clamp – let’s do it right the first time! ⬇️


Next up, installing and removing the powerful Voima Bosch PowerTube 750 battery ⬇️


Next up on the list is the rear brake. You’ll need one of these to slow you down (the Voima is F-A-S-T!) Here’s a guide on how to do it ⬇️


Fitting your dropper post cable/hose is super easy on your Voima frameset too. Here’s how to do it ⬇️


Let’s shift it up to a gear – next up is the gear cable routing on the Voima frameset ⬇️


A pretty important part of any E-bike is the crankset! Here’s how to fit them⬇️


Let’s keep your frameset looking fresh and free from any scratches and scrapes whilst out on the trail. Here’s how to fit the Voima PE slider ⬇️


Congratulations! You’ve built up your Voima frameset into a complete bike and you’re ready to hit the trails (fast!) Here’s how to switch on and operate all the modes on the Voima using the Bosch LED Remote ⬇️


A little bit of maintenance next. Here’s how to remove the Bosch motor cover from your Voima frameset ⬇️


Swapping a shock on a Voima frameset is really straightforward – here’s how ⬇️


×

Select your country

×

Have a question about the Voima and can’t seem to find the answer?
Check out the Voima FAQ page.